Archive

Archive for the ‘Virgin Media’ Category

DHCP reservation VIRGIN superhub

June 26, 2015 Leave a comment

I’m not going to go through this all again but take a look at this youtube video

GO HERE

Advertisements

Replaced the Asus internal WiFi link

April 25, 2015 Leave a comment

Asus S300 comes with a azure wave aw-nb126h IEEE 802.11 b/g/n BT combo pcie minicard

That doesn’t pick up 5ghz signal, so removed it very very simple job for a spare Intel 5100 that does

#SpeedUp

image

Foscam update – new ISP VIRGIN MEDIA SETUP !!

March 11, 2015 Leave a comment

The original BT setup can be found here for homehub 4 after 18 months I’ve moved to Virgin Media 100mb service for at least 12 months. (BT setup here)

First thing to do is enter your VM setup on your browser – 192.168.0.1 and enter your password and pin (found at the bottom of your router)

Then head to advanced settings and port forwarding (as with BT setup you need to know the IP addy of the camera as your goning to add a new rule to allow it access to the router)

My IP addy is:  192.168.0.6 wired and 192.168.0.7 wireless

Ipcamera tool software HERE ( get it first you need it to find out the camera’s IP addy GET IT OR YOUR GOING TO FAIL)

** CONNECT THE CAMERA VIA ETHERNET FIRST TO GET THE INFO ** ANOTHER MUST !!!

*********Follow these steps **********

Step 1: double click on the camera when it shows up with IP camera tool

Step 2: click on server push mode

Step 3: device management

Step 4: Wireless LAN

Step 5: scan for router (makes sure your wps is active just incase eg: press button it allows access flashes different colour

Step 6: select router

Step 7 enter password and save – router reboots

Step 8: rerun IPCAMERA setup to make sure its the same IP addy (you will need this for android apps like TINYCAM Monitor pro)

Step 9: access from google chrome 192.168.0.7:8091 (ip and port forward info) enter user and pass good to go !!!

Step 10: see your little monkey performing at the comfort of your armchair

has this helped give us a LIKE or leave some feedback I’ve tried to make it plain and simple to follow, did I miss something ? please leave your feedback always welcome